1083 – 3-Output Video Signal Amplifier

1083 – 3-Output Video Signal Amplifier
Broad band signal distribution amplifier will take the video signal from a VCR, cable box or satellite box output and amplify it sufficiently to drive up to three TVs, monitors or VCRs (making simultaneous multiple copies from a single tape possible). Or you could have a monitor connected to one output to check what you are recording.

The amplifier is also useful for boosting video signals where you have long cable runs.

Technical Specifications
Input 1 x 75 Ohm
Outputs 3 x 75 Ohm
Bandwidth 5MHz
Working Voltage 12Vdc e.g. Order Code PSU303 with connector 778.106 or kit 1061.
Max. current 100mA
Suitable box 2083BX
Board Dimensions 35x120mm
Board Connections Solder Posts
1083 – 3-Output Video Signal Amplifier
Broad band signal distribution amplifier will take the video signal from a VCR, cable box or satellite box output and amplify it sufficiently to drive up to three TVs, monitors or VCRs (making
simultaneous multiple copies from a single tape possible). Or you could have a monitor connected to one output to check what you are recording.

The amplifier is also useful for boosting video signals where you have long cable runs.

Technical Specifications
Input 1 x 75 Ohm
Outputs 3 x 75 Ohm
Bandwidth 5MHz
Working Voltage 12Vdc e.g. Order Code PSU303 with connector 778.106 or kit 1061.
Max. current 100mA
Suitable box 2083BX
Board Dimensions 35x120mm
Board Connections Solder Posts