Winkel

ADAPTER BNC vrouw > AANSLUITBLOK 2 PIN
30 maart 2023
Vertical antenne Sigma PLUS KIT for HF-X
30 maart 2023

Vertical antenne Sigma HF360XP

249.00

Op voorraad

SKU: 08805 Categorie:
Beschrijving

Vertical antenne Sigma HF360XP
The Sigma Euro-Comm Ltd HF360 is an end fed vertical antenna, capable of allowing the user to work 80 meters through to 10 meters using an ATU. The antenna can be pole mounted at ground level or elevated depending on the user′s personal requirements. The antenna is rated at 1KW* pep. The antenna comes with fixings and installation guide.

How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit a 4:1 UNUN transformer is located in an IP65 weather sealed box at the bottom of the bracket section of the fibre glass elements. The antenna comes in four parts, three fibreglass poles and one stainless steel tapered whip. The transformer reduces the impedance at the feed point to a more acceptable level making the antenna much more efficient and allowing proper and easy tuning via an external ATU and automatic ATU′s found in most modern radios.

The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.

Specifications
Type: End fed vertical
Frequency:
…TX: 3.5 – 30 MHz
…RX: 1.8 – 55 MHz
Power handling: 1 kW PEP or CW & 200 watts max for data modes
Impedance: 50 Ohms
Connector: UHF-Female (SO-239)
Length: 5.5 meters 18 feetVertical antenne Sigma HF360XP

The Sigma Euro-Comm Ltd HF360 is an end fed vertical antenna, capable of allowing the user to work 80 meters through to 10 meters using an ATU. The antenna can be pole mounted at ground level or
elevated depending on the user’s personal requirements. The antenna is rated at 1KW* pep. The antenna comes with fixings and installation guide.

  • How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit a 4:1 UNUN transformer is located in an IP65 weather sealed box at the bottom of the bracket section of
the fibre glass elements. The antenna comes in four parts, three fibreglass poles and one stainless steel tapered whip. The transformer reduces the impedance at the feed point to a more acceptable
level making the antenna much more efficient and allowing proper and easy tuning via an external ATU and automatic ATU’s found in most modern radios.

  • The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.

Specifications
  • Type: End fed vertical
Frequency:
  • TX: 3.5 – 30 MHz
  • RX: 1.8 – 55 MHz
  • Power handling: 1 kW PEP or CW & 200 watts max for data modes
  • Impedance: 50 Ohms
  • Connector: UHF-Female (SO-239)
  • Length: 5.5 meters 18 feet
Merk
SIGMA
Extra informatie
Gewicht 30.000 kg
Beoordelingen (0)

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Vertical antenne Sigma HF360XP” te beoordelen

Je e-mailadres zal niet getoond worden. Vereiste velden zijn gemarkeerd met *